1 12
download product package

12V 150Ah Lithium Battery, 60W Foldable Solar Panel, 600W Inverter, 12.6V 20A Charger, CATL 3-Cell Li-Ion, 120A Output, Waterproof Display, USB-C, USB-A, Dual DC5525, IEC C14, M8 Terminals for RV Fish

Est. Profit: $330.63
Apply to become a partner to view prices →
Taxes included.

126 in stock

View full details

Product Description

Box D

Box D inclde
1 × 12V 150Ah Marine Lithium Battery Power Station 1 × 12V 20A Smart Lithium Battery Charger 1 × 600W Modified Sine Wave Power Inverter 2 × Heavy-Duty Inverter Connection Cables
Box E

Box E include
1 × Dual-Fold Portable Solar Panel 1 × Solar Charge Controller 1 × 2 m DC5525 Extension Cable 1 × Adjustable Mounting Bracket Several Outdoor Carabiners
How to Set Up This Solar Power Station
1. Ensure the battery and inverter switches are OFF before installation. The battery’s main power switch has three positions: ON, OFF, and OUT. When the unit is not in use, turn the switch to OUT and remove the switch knob. Before use, reinstall the knob and turn the switch to OFF.

2. Connect the battery and inverter using the red (+) and black (−) cables. Connect the cable's No. 6 ring terminal to the inverter and No. 8 terminal to the battery. Verify polarity and tighten securely.

3. Connect the 2m extension cable between the solar panel output and controller input.

4. Connect the charge controller output to either of the battery’s DC5525 ports. Both ports support charging input and power output. Two compatible solar charging panels can be connected to the two ports simultaneously, subject to the specified input limits.

5. Turn on the lithium battery main switch and verify that the battery level display lights up.

6. Check the solar charge controller display to confirm that the battery is charging.

7. Turn on the inverter switch. You should hear a beep, the inverter indicator should change from red to green, and the cooling fan should operate normally.

Once all the above checks are complete, the system startup is complete.
How to Set Up the Solar Charge Controller
1. Connect the Battery: Connect the controller's middle output cable to the battery. The display will show the battery voltage.

2. Enter Setup Mode: Press the leftmost button five times until “b1” appears. Press and hold the leftmost button until "b1" starts flashing.

3. Select Battery Type: Press the middle button to switch between b1 (lead-acid), b2 (ternary lithium), and b3 (LiFePO4). Select the setting that matches your battery, then hold the leftmost button until the display stops flashing to save. For our optional ternary lithium battery, select b2.

4. Connect the Solar Panel: Connect the controller’s left-side cable to the solar panel extension cable. Once connected, the display should indicate charging status, showing that solar power is being supplied to the battery.
Dual Charging: Solar or Included 12.6V 20A Charger
Simply connect the charger’s IEC C14 connector to the battery’s IEC C13 charging port, then turn the battery switch to the ON position. The charger’s indicator light will turn red and the cooling fan will start running, indicating that charging is in progress. When the indicator light turns green, the battery is fully charged and ready for use.
Troubleshooting: Controller Screen Won't Turn On
If all connections are correct but the controller display remains off, check whether the input or output wires are loose. If any wires are loose: 1. Loosen the controller terminal screws. 2. Insert the red wire into the positive (+) terminal. 3. Insert the black wire into the negative (−) terminal. 4. Tighten the terminal screws securely with a screwdriver.
How to Tighten the Positive and Negative Terminals
The battery terminals may loosen over time and need tightening. 1. Open the battery box cover. 2. Identify the red positive terminal near the main switch and the black negative terminal farthest from the switch. 3. Locate the fixing nuts on the right side of the battery box. Hold them with pliers to prevent rotation. 4. Insert a thin hex wrench into each terminal hole and turn clockwise to tighten. Safety Tip: Turn off the main battery switch before maintenance.
Troubleshooting: Tightening Inverter Terminals
Frequent use may cause the internal fixing nuts of the inverter’s positive (+) and negative (−) terminals to loosen. Turn off the power before maintenance. First, loosen and remove the terminal nuts. Then, use pliers to turn the base screws clockwise to secure them, as shown in the diagram.

Product Features

  • [All-in-One Outdoor Power Solution] -This complete power kit includes a12V 150Ah lithium battery, a 60W foldable solar panel, a 600W inverter, and a 12.6V 20A charger. Designed for versatile off-grid power, it provides a convenient energy solution for fishing boats, marine applications, RVs, camping, and other outdoor activities, helping keep your essential devices powered wherever your adventures take you.
  • [1800Wh CATL Lithium Battery] -Powered by three premium CATL 3.7V 150Ah cells in series, this 12V 150Ah lithium battery delivers 1800Wh of energy capacity and up to 120A output. Features include a waterproof battery display, USB-A and USB-C ports, dual DC5525 input/output ports, an IEC C14 port, a main power switch, and secure M8 terminals. Weighing just 8.6kg, its durable housing and ergonomic handle make it ideal for marine use, fishing boats, RVs, camping, and outdoor adventures.
  • [60W High-Efficiency Foldable Solar Panel] -Featuring advanced EVA vacuum lamination, up to 28% cell conversion efficiency, and IP68 waterproof protection, this 60W foldable solar panel provides reliable power for marine use, fishing boats, RVs, camping, and outdoor adventures. Weighing under 1 kg, it features a portable design and includes a solar charge controller with dual DC5525 ports, a 2m extension cable, and an adjustable kickstand for convenient off-grid charging.
  • [Dual Charging Options with Dedicated 12.6V 20A Charger] -Enjoy flexible charging with solar power or the included dedicated 12.6V 20A lithium battery charger. Designed for compatible 12.6V lithium battery systems, it provides a convenient alternative to solar charging for everyday use at home, in RVs, on fishing boats, in marine applications, and during outdoor adventures.
  • [600W Modified Sine Wave Power Inverter] -Converts 12V DC battery power to 110V AC, delivering 600W continuous power and up to 1200W peak power. Ideal for powering compatible laptops, small appliances, and other AC devices during camping, RV trips, marine use, emergencies, and outdoor adventures. A convenient portable power solution for everyday off-grid needs.

You may also like